Last Updated on
One of the most frustrating things that can happen to a blender owner is when their blender won’t spin. This usually happens because there are too many ingredients or too much liquid, and the blades get stuck on the bottom.
The Blender is a very important part of a kitchen, you can mix anything in it. But there are times when it will not work, the cause may be the fuse or have an electric failure. This is a common problem; most people encounter this problem. It is very easy to fix it.
In this blog post, we will talk about how to fix your blender so it spins again!
How do you fix a blender that won’t spin?
- The first thing that should be done is to check whether there are any dry goods blocking the blades (too many ingredients). Remember: too much of anything can cause trouble when trying something new and unfamiliar! The best thing to do would be to remove enough of those dry goods so that when you turn the blender on, it will get sucked in and blended.
- The next thing to check is whether or not there are any liquid goods blocking the blades (too much water). If that’s the case then you’ll need to remove some of those liquids with a spoon so they can be mixed within the blade area.
- Finally, if none of these cases apply then your blender might just have gotten too hot! You may want to let it cool off before turning it back on while also giving yourself time to think about what went wrong so this problem doesn’t happen again.
Blender Blade Not Spinning: Not Enough Liquid
If your blender blade isn’t spinning, it could mean that it isn’t getting enough liquid to work with, which can happen quickly if you forget to add liquid to your recipe. The amount of liquid you need will vary depending on the recipe you’re preparing and how powerful your blender is. However, a good rule of thumb is to use 2 cups of liquid for every cup of solids you are blending.
Blender Blade Won’t Spin: Too Much Food
A common blender problem among users is that the blade doesn’t spin because too much food has been loaded into the blender.
If your blender blade won’t spin, it might be because there is too much food in it. Why is that? Blenders use centrifugal force to chop up food, but this can only work if there’s enough room for the blade to move around. If there is too much food in the blender, it can’t move around, so the blender blade won’t spin.
The Blades Are Jammed Up
When your blender blade won’t spin, there are usually two reasons: either the blade is jammed up with food residue or the blade has fallen off the motor shaft. In the first case, you should simply use a toothpick or the end of a paper clip to remove any blockages. (Of course, never do this if the blender is plugged in or turned on!)
If you can’t find and remove a blockage, then the blade is likely to have fallen off the motor shaft. You should be able to remove the blade by turning it an eighth of a turn counterclockwise.
Blender blades are made to spin at high speed, which makes them both extremely strong and vulnerable to getting jammed. This can happen for several reasons.
The most common is organic matter such as small pieces of food getting stuck between the blades. This causes them to become lodged and not spin freely. This can be cleaned out by taking apart the blender, but don’t try to force the blades to move, as they are very sharp and designed to spin at high speed.
Extractor Blade Seal Damage
If you have ever owned a blender, you are familiar with the loud and obnoxious noise it makes when the blade won’t spin. The noise is your blender’s way of telling you that something is wrong, and it’s time to call a blender repair specialist to take a look at the blade seal on your blender.
The blade seal is the rubber gasket that sits between the blade and the blender container. It is designed to keep the blade spinning freely and to keep the contents of the blender from leaking out.
When this gasket has been compromised, it can lead to a blade not spinning, the contents of the jar leaking out, or loud grinding noise from the blade that gets louder the longer the blender is on.
Loose Extractor Blade
A blender blade won’t spin when the extractor blade is loose. The extractor blade is the one that looks like little wings on the side of the blade assembly. You’ll know the extractor blade is loose if it wobbles during operation.
Loose blades in your blender can cause your blender blade not to spin, and if you don’t get them fixed, you may risk breaking the whole blender. (Seriously, we’ve seen a few YouTube videos of people who have actually done this.) But don’t worry, you can easily tighten your extractor blade with a few simple tools.
You Put The Wrong Foods In
Unfortunately, the blender blade won’t spin if you put the wrong foods in your blender. That’s because different foods require different amounts of liquid to get moving. For example, to make mayonnaise you’ll need 10 times more liquid than if you were blending potatoes. (In fact, if you’re making mayo, you should probably stick to egg yolks, oil and lemon juice—no potatoes or hot dogs, for sure!)
The best way to avoid this problem is to read your appliance’s user manual to find out what foods it’s designed for.
Blender blades are usually encased in a spinning metal housing, but they can still break if you use the wrong foods. This usually happens when the blade is paired with foods that are too hard, too tough, too sticky, too wet, or too dry.
Blender blades break when paired with foods that are too hard, too tough, too sticky, too wet, or too dry. The good news is that most blender blades are very easy to replace on most blenders. Although the specific process to replace them may vary slightly from model to model, the general process described below applies to most blenders.